(Item # : Xantrex_Freedom-25)
By Xantrex
Model : 81-2511-12
Freedom Marine Inverter/Chargers are the ideal complement for your boat's marine electrical system , appliances and equipment . Reliable and value priced Freedom marine units are the popular choice amongst boaters worldwide . The Inverter/charger provides silent , modified sine wave AC power on board so you can experience the comfort of home when you are away from shore power . To protect the inverter/charger from the harsh marine enviroment , Freedom Marine 25 comes with an aluminum chassis and conformal coated circuit boards . It integrates a high performance battery charger with duel echo charge auxiliary output to charge additional battery banks . The Freedom Inverter/Charger units are designed for fully automatic" hands-off " operation . They are the most technologically advanced line of inverter/chargers anywhere . Freedom inverters perform more tasks than anything else on the market and do so efficiently , silently , reliably and automatically . They're highly efficient , produce exceptionally clean AC power have built-in sophisticated high -output battery chargers and automatic power source transfer switching . In addition , the Freedom units offer some unique important new capabilities such as "Power Sharing" . The problem used to be when you plug back into outside AC power , your high output battery charger would use much of the available power- often resulting in the outside AC breaker tripping if you try to use an AC appliance . However , the Freedom units will prevent this by reducing the current to the built-in charger when it senses the use of AC appliances . They call it "Power Sharing" . The battery charger resumes full output only when adequate AC power is again available . For additional functionality , Freedom Marine 25 inverter/charger can be combined with Xantrex's optional (Link Instrumentation) . Link battery monitor and advanced remote control panels provide complete battery-state-of-charge information including DC voltage , current , amp-hours consumed , historical data and more for single or duel battery packs .
Freedom Marine 25 Specifications
| |
Electrical Specifications
- Inverter |
| |
Output power (continuous) |
|
2500 W |
| |
Surge power (AC amps) |
|
62.5 A |
| |
Output frequency regulation |
|
50 or 60 Hz, quartz
regulated |
| |
Inverter voltage regulation |
|
120 V +/-5% true RMS |
| |
Output wave form |
|
Modified sine wave |
| |
Efficiency (full load) |
|
87% |
| |
Peak efficiency |
|
93% |
| |
No load current draw (idle mode) |
|
0.12 A |
| |
AC transfer switch |
|
30 A |
| |
Electrical Specifications
- Charger |
| |
Charge rate |
|
130 A DC |
| |
AC input voltage range |
|
90 − 130 VAC |
| |
Battery voltage (nominal) |
|
12 VDC |
| |
Battery voltage range |
|
10.0 − 15.5 VDC |
| |
Low battery cut-out |
|
10.0 VDC |
| |
AC input (max. charge mode) |
|
26 A AC |
| |
Bulk charge voltage |
|
14.4 VDC |
| |
Float charge voltage |
|
13.5 VDC |
| |
Equalize charge voltage |
|
16.3 VDC |
| |
Battery charge outputs |
|
3 |
| |
Charge control |
|
3-stage |
| |
Battery type settings |
|
Wet/Gel 1/Gel 2/AGM |
| |
Equalization |
|
Yes |
| |
Temperature sensitive charging |
|
Yes |
| |
General
Specifications |
| |
Optimal operating temp. range |
|
32°F − 104°F (0°C − 40°C)
*derated below
0°C and above 40°C |
| |
Optional remotes |
|
Freedom Basic Remote or Link
instrumentation |
| |
Dimensions (H x W x L) |
|
7.9 x 11.5 x 13.2” (201 x 292 x 335
mm) |
| |
Weight |
|
50 lb (23 kg) |
| |
Warranty |
|
30 months |
| |
Part numbers |
|
81-2511-12 |
| |
|
|
84-2056-01 (Freedom Basic Remote) |
| |
|
|
84-2019-02 (Link 1000) |
| |
|
|
84-2000-06 (Link 2000) | Document Download (PDF file)
|
