(Item # : Xantrex_Freedom-20)
By Xantrex
Model : 81-2011-12
2000 watts continuous , 100 Amp 3-stage charger , Temperature Sensitive Charging , Single 15 amp echo-charge auxiliary output .
Description
AC Power Inverter with High Surge Capability, 3-Stage
Charger
With filtered modified sine wave output, Freedom Marine inverter/chargers run
virtually anything on your boat, from office equipment to household appliances
and electronics. Temperature controlled multistage charging ensures that your
batteries are recharged safely and efficiently. Its integrated transfer switch
allows for automatic change-over between shorepower and inverter.
For inverter/charger control and basic system monitoring, use the Freedom
Basic Remote. For advanced battery monitoring and remote control, Freedom Marine
inverter/chargers can be paired with optional (Link Instrumentation).
Product Features
- MSW AC power inverter with high surge capability
- Automatic 3-stage battery charger
- Temperature compensation with equalization stage provides optimal charging
of deep cycle batteries
- Built-in transfer switch automatically transfers between inverter power and
incoming AC power
- Multiple battery bank charging from the built in 15 A echo~charge
- Power sharing prevents source AC input circuit breaker from tripping
- Customized settings can be programmed with the Freedom Basic Remote or Link
panels
- Aluminum chassis ideal for marine environment
- Includes battery temperature sensor
- 30 month warranty
Protection Features
- Over voltage and under voltage protection
- Over-temperature protection
- Overload protection
- Short circuit protection
Freedom Marine 20 Specifications
| |
Electrical Specifications
- Inverter |
| |
Output power (continuous) |
|
2000 W |
| |
Surge power (AC amps) |
|
50 A |
| |
Output frequency regulation |
|
50 or 60 Hz, quartz
regulated |
| |
Inverter voltage regulation |
|
120 V +/-5% true RMS |
| |
Output wave form |
|
Modified sine wave |
| |
Efficiency (full load) |
|
85% |
| |
Peak efficiency |
|
93% |
| |
No load current draw (idle mode) |
|
0.12 A |
| |
AC transfer switch |
|
30 A |
| |
Electrical Specifications
- Charger |
| |
Charge rate |
|
100 A DC |
| |
AC input voltage range |
|
90 − 130 VAC |
| |
Battery voltage (nominal) |
|
12 VDC |
| |
Battery voltage range |
|
10.0 − 15.5 VDC |
| |
Low battery cut-out |
|
10.0 VDC |
| |
AC input (max. charge mode) |
|
21 A AC |
| |
Bulk charge voltage |
|
14.4 VDC |
| |
Float charge voltage |
|
13.5 VDC |
| |
Equalize charge voltage |
|
16.3 VDC |
| |
Battery charge outputs |
|
2 |
| |
Charge control |
|
3-stage |
| |
Battery type settings |
|
Wet/Gel 1/Gel 2/AGM |
| |
Equalization |
|
Yes |
| |
Temperature sensitive charging |
|
Yes |
| |
General
Specifications |
| |
Optimal operating temp. range |
|
32°F − 104°F (0°C − 40°C)
*derated below
0°C and above 40°C |
| |
Optional remotes |
|
Freedom Basic Remote or Link
instrumentation |
| |
Dimensions (H x W x L) |
|
7.9 x 11.5 x 13.2” (201 x 292 x 335
mm) |
| |
Weight |
|
45 lb (20 kg) |
| |
Warranty |
|
30 months |
| |
Part numbers |
|
81-2011-12 |
| |
|
|
84-2056-01 (Freedom Basic Remote) |
| |
|
|
84-2019-02 (Link 1000) |
| |
|
|
84-2000-06 (Link 2000) |
Document Download (PDF file)
