Fishfinders,Chartplotters,GPS,
Marine Stereos, Ice Fishing-
Fishfinders and more.
|
|
|
Fishing Equipment
  |
 |
|
|
Think Ahead, Stay Ice Free!
|
Products
Page 1
|
 |
 |
(Item # : Xantrex_Link_20)
By Xantrex
|
 |
Description
Single and Dual Battery Bank Monitors
Provides Battery Status
Information At-A-Glance
Link 10 (part#84-2016-01) and Link 20 (part#84-2020-00) use sophisticated
microprocessor technology to provide complete battery status information for one
and two battery banks, respectively. Simple and easy-to-use multicolor displays
show volts, amps, amp hours consumed, and operating time remaining. The Link 10
and 20 allow you to select Automatic, Sleep and Scanning modes and automatically
calculate and display charging efficiency. The Link 20 can monitor a house bank
and starting bank or two house bank batteries at the same time. By adding an
optional prescaler, Link 10 can monitor single battery banks up to 500
volts.
Product Features
- Digital Numeric Display - LED display shows numeric read out of volts, amps,
amp-hours and time remaining
- Easy to read multi-color LED bar graph
- Splash proof panels allow for outdoor mounting and hands free operation
- Displays key historical battery information such as charge efficiency,
deepest discharge, and average discharge
- Compatible with 12 and 24 volt DC systems
- Works with any battery type
- Includes DC shunt (part#84-2010-00)
- One year warranty
Accessories
- Color-coded, twisted pair cable (eases installation). Available in 25
(part#84-2014-00) or 50 foot lengths (part#84-2015-00).
- Prescalers (0-100 or 0-500 volts) to extend voltage range covered by your
meter
Options
- Link 10 also available in "Choice" option (part#84-2016-02) with RS232
Serial Data Port and alarm switch
|
Link 20 Specifications
| |
Electrical
Specifications |
| |
Voltage Measurement
(standard model auto
range) |
|
0-19.95 VDC (0.05 V
resolution) |
| |
|
|
20.0-50.0 VDC (0.1 V
resolution) |
| |
Amperage Measurement |
|
Low range +/- 0-40 A (0.1 A
resolution) |
| |
|
|
High range +/- 500 A (1.0 A
resolution) |
| |
Amp-hour Measurement |
|
Low range +/- 0-199 Ah (0.1 hour
resolution) |
| |
|
|
High range +/- 200-1, 999 Ah (1 hour
resolution) |
| |
Time Remaining Measurement |
|
Low range 0-199.9 hours (0.1 hour
resolution) |
| |
|
|
High range 0-255 hours (1 hour
resolution) |
| |
Power Requirements |
|
9.5-40 VDC (DC power supply
voltage) |
| |
Power Consumption |
|
50-225 mA (display auto dims with ambient
light) |
| |
|
|
28 mA (sleep mode - bar graph display
only) |
| |
Shunt Type |
|
500 A/50 mV (dual included) |
| |
Accuracy |
|
Voltage +/- 0.6% of reading + 1 least count
of resolution |
| |
|
|
Amperage +/- 0.8% of reading + 1 least count
of resolution |
| |
General
Specifications |
| |
Installation |
|
Surface mount |
| |
Front Panel |
|
Splash resistant |
| |
Dimensions (H x W x D) |
|
4.725 x 2.075 x 1.075" (120 x 75.5 x 27.3
mm) |
| |
Weight (not including shunt) |
|
4.6 0z (130.4 g) |
| |
Warranty |
|
1 year |
| |
Part numbers |
|
84-2020-00 (Link 20) |
| |
|
|
84-2014-00 (Twisted Pair 25' - recommended
for Link installations) |
| |
|
|
84-2015-00 (Twisted Pair 50' - recommended for Link
installations) |
| Document Download (PDF file) |
|
|
Price
$298.75
|
|
 |
|
(Item # : Xantrex_Basic_Freedom_Remote)
By Xantrex
Part # : 84-2056-01
Freedom Basic Remote
Take the guesswork out of understanding your Freedom 458, Freedom Marine and
Freedom Combi inverter/chargers. Freedom Remote conveniently controls the
functions and setup of your inverter/charger.
|
|
Description
Battery Status and Freedom Inverter/Charger Remote
Control
Provides Valuable Inverter/Charger System Monitoring and Control
The Freedom Remote Control Panel (part#84-2056-01) allows you to control your
Freedom Combi, Freedom 458 and Freedom Marine Series Inverter/Charger system
from any convenient location. It is easy to read, operate and install, and all
controls can be accessed directly from the front panel.
Product Features
- Independent invert and charge on/off controls
- Push button control of power sharing, equalizing, battery set-up
- Multi-colored LED displays battery state of charge, fault conditions, AC
input, DC voltage and DC amperage
- LED warning indictors for low battery and overload warning
- Splash resistant design
- Incoming AC breaker selection allows programmable power sharing
- Easy to install
- One year warranty
Note: The 24-volt models of Freedom Combi inverter/chargers require a
different Freedom Remote – the Freedom 24-25 |
|
|
Specifications
| |
Specifications |
| |
Voltage bar graph |
|
10.0 - 15.5 VDC |
| |
DC amps bar graph |
|
Idle mode = off |
| |
|
|
Loaded = <10 - 300 DC
amps |
| |
Operating temperature range |
|
32° F to 158° F (0° C to 70°
C) |
| |
Compatible battery types |
|
wet/gel/AGM |
| |
Design |
|
Splash resistant |
| |
Dimensions (H x W x L) |
|
5.5 x 3.75 x 1.75" (140 x 95 x 44
mm) |
| |
Cutout size: (H x W) |
|
4.875 x 2.875" (116 x 73
mm) |
| |
Weight |
|
3 oz (85 g) |
| |
Warranty |
|
One year |
| |
Part number |
|
84-2056-01 | |
|
|
Price
$99.75
|
|
 |
|
(Item # : Xantrex_Link_Instruments)
Link 1000
|
|
Description
Integrated Battery Monitor and Inverter/Charger Control in a Single
Panel
The Link 1000 is an instrumentation and control panel designed for use with
the Xantrex Freedom series inverter/charger and a single battery bank. It reads
like a fuel gauge for batteries – displaying battery state-of-charge at a
glance. Inverter and charger functions are independently controlled with the
touch of a keypad.
Product Features
- Digital numeric display automatically compensates for ambient conditions and
selectively shows: DC volts and amps, battery amp hours consumed, time
remaining to full discharge, fault conditions
- Multi-colored LED displays: approximate battery state of charge, AC
input
Push button control of power sharing, equalizing, battery set-up,
independent inverter and charger on/off controls
- Second sense lead for voltage sensing on an additional battery bank
- Power Share and Idle Mode are easily set from the panel
- Compatible with 12 or 24 volt sytems
- Includes precision DC shunt
- Easy to install
- One year warranty
Programmable Advanced Functions
- User programmable adjustments of the Freedom Inverter/Charger directly from
the front panel
- Can be set for four different battery types including wet, gel and AGM
- Data is used to recall key information about the battery bank: charge
efficiency, deepest discharge, average discharge, and other data
|
|
|
Specifications
|
|
Electrical
Specifications |
|
|
Voltage Measurement
(standard
model auto range) |
|
0-19.90 VDC (0.05 V
resolution)
0.0-50.0 VDC (0.1 V
resolution) |
|
|
Amperage Measurement
(+/- 500
amps) |
|
Low range 0-40 A +/- 0.1 A
resolution |
|
|
|
|
High range 40-500 A +/- 1.0 A
resolution |
|
|
Amp-hour
Measurement |
|
Low range +/- 0-199.9 Ah (0.1 hour
resolution) |
|
|
|
|
High range +/- 200-1, 999 Ah (1
hour resolution) |
|
|
Time Remaining
Measurement |
|
Low range 0-199.9 hours (0.1 hour
resolution) |
|
|
|
|
High range 0-255 hours (1 hour
resolution) |
|
|
Power
Requirements |
|
8-40 VDC (DC power supply
voltage) |
|
|
Power
Consumption |
|
50-170 mA (display auto dims with
ambient light) |
|
|
|
|
25 mA (bar graph display @ 12
V) |
|
|
Shunt
Type |
|
500 A/50 mV
(included) |
|
|
Accuracy |
|
Voltage +/- 0.6% of reading + 1
least count of resolution |
|
|
|
|
Amperage +/- 0.8% of reading + 1
least count of resolution |
|
|
|
|
Amp-hours Ah Error - time
measurement x current error |
|
|
General
Specifications |
|
|
Dimensions (H x W x
D) |
|
3.0 x 4.75 x 1.1" (75.5 x 120 x
27.3 mm) |
|
|
Weight (not including
shunt) |
|
4.6 0z (130.4
g) |
|
|
Warranty |
|
1
year |
|
|
Part
number |
|
84-2019-02 |
|
Document Download (PDF file) |
|
Note: Specifications subject to
change without notice. | |
|
|
Price
$263.50
|
|
 |
|
(Item # : Xantrex_Link_2000)
By Xantrex
|
|
Description
Integrated Battery Monitor and Inverter/Charger Control
The Link 2000 instrumentation and control panel is designed for use with the
Xantrex Freedom series inverter/charger and a dual battery bank. It displays
critical DC electrical information for 12 and 24 VDC systems and allows for
advanced setup of critical inverter and charger functions. An easy to read LCD
display provides a digital readout of system data.
The Link 2000R offers the features of the Link 2000 plus a three-stage
advanced alternator regulator and alternator output monitoring. (For use only
with 12 or 24 volt “P” Field type alternators.)
Product Features
- Digital display of volts, amps, amp-hours consumed and time remaining until
full discharge
- Easy to read backlit LCD display
- AC input and charging status display
- Flush mount design
- Includes DC shunt
- Easy to install
- One year warranty
Programmable Advanced Functions
- User programmable adjustments of the Freedom Inverter/Charger directly from
the front panel
- Can be set for four different battery types including wet, gel and AGM
- Data is used to recall key information about the battery bank: charge
efficiency, deepest discharge, average discharge, and other data
|
2000 Specifications
|
|
Electrical
Specifications |
|
|
Voltage Measurement
(standard
model auto range) |
|
8.5-50 VDC (0.05 V
resolution) |
|
|
Amperage Measurement
(+/- 500
amps) |
|
Low range 0-40 A +/- 0.1 A
resolution |
|
|
|
|
High range 40-500 A +/- 1.0 A
resolution |
|
|
Amp-hour
Measurement |
|
Low range +/- 0-199.9 Ah (0.1 hour
resolution) |
|
|
|
|
High range +/- 200-1, 999 Ah (1
hour resolution) |
|
|
Time Remaining
Measurement |
|
Low range 0-199.9 hours (0.1 hour
resolution) |
|
|
|
|
High range 0-255 hours (1 hour
resolution) |
|
|
Power
Requirements |
|
9-40 VDC (DC power supply
voltage) |
|
|
Power
Consumption |
|
28 mA (adjustable back-light adds
1-18 mA) |
|
|
Shunt
Type |
|
500 A/50 mV
(included) |
|
|
Accuracy |
|
Voltage +/- 0.6% of reading + 1
least count of resolution |
|
|
|
|
Amperage +/- 0.8% of reading + 1
least count of resolution |
|
|
|
|
Amp-hours Ah Error - time
measurement x current error |
|
|
General
Specifications |
|
|
Dimensions (H x W x
D) |
|
3.72 x 5.75 x 1.25" (95.25 x 146 x
31.75 mm) |
|
|
Weight (not including
shunt) |
|
9 oz (255.2
g) |
|
|
Warranty |
|
1
year |
|
|
Part
numbers |
|
84-2000-06 (Link
2000) |
|
Document Download (PDF file) |
|
|
Price
$436.95
|
|
Page 1
|
|
|
