Si-Tex SP-70 Autopilot System Handheld Model : SP-70R ($1127.85)
The SI-TEX SP-70 Autopilot will add relaxation to your
cruising and fishing activity. Designed for most any boat and easily installed
on outboard, inboard and sterndrive vessels with either hydraulic, or quadrant
steering systems.
Low cost autopilot designed for easy installation.
The SI-TEX SP-70
Autopilot will add relaxation to your cruising and fishing activity. Designed
for most any boat and easily installed on outboard, inboard and sterndrive
vessels with either hydraulic, or quadrant steering systems.
Ultra-compact, waterproof Control Unit has simple keypad operation and large
LCD display of heading course, rudder angle, operating mode and error messages.
Control Unit can be used as dash-mounted keypad or quickly and easily
removed from mounting bracket for use as a handheld portable.
Additional steering stations can be easily added with optional plug-in
connectors.
Exceptionally easy to use. Just steer to desired course, press the PILOT key
and the system takes over to steer you on your way. Automatically.
Built-in NMEA-0183 Loran/GPS interface for precise course-line navigation
along routes.
Bold, backlit displays with ten levels of brightness for clear reading in
any light.
Digital displays of rudder angle and operation mode in use, constantly
giving you up-to-the-minute operating status.
Automatic Sea State and Trim Controls and ten selectable levels of rudder
sensitivity with high and low speed settings for smooth, precise steering.
Rudder feedback verifies autopilot's commands.
Ghost Rudder backup allows autopilot to use memory of rudder movements to
calculate new movements in event of rudder feedback failure.
Heading Output feature allows you to stabilize radar display.
Built-in diagnostic and self tests, plus visual and audible alarms.
Power Steering mode offers convenient push-button steering. Stand By mode
for manual steering situations.
Optional analog Rudder Angle Indicator for easy, at-a-glance reading of
exact rudder position.
Works with solenoid valves also.
SI-TEX SP-70 AUTOMATIC PILOT - Specifications
Operating Voltage
10 ~
40V DC
Power Consumption
Average 3 amps, 20 amps peak
Solenoid Output
20
amps max
DC Reversing Pump
± 20
amps max.
Clutch Output
3
amps max
Radio Navigational Interface
NMEA
0183
Heading Reference
Fluxgate
Course Resolution
l°
Course Detection
0.25°
Pumpset
18
cubic inch, 12V DC standard*
Dimensions
Control Unit: 2.8"W x 1"D x 5.2"H Processor Unit: 6.3"W
x 15"L x 2.7"H Fluxgate Compass: 5.6"W x 4.2" x
3.4"H Pump: 4.8"W x 7.5"L x 4"H
*Optional Pumpsets Available
30
cubic inch, 12V DC or 32V DC for vessels up to 60' 75 cubic inch, 32V DC for
vessels over 60' Call Customer Service for
Details.
Options
Rudder Angle Indicator Kit for Second Station
installation
For boater who know where they're going. SP-80 takes you where you want to
be--effortlessly. It's smart, precise piloting gives you the extra hand on deck
you've always needed. And the operation is a snap: Simply set the course and the
SP-80 takes the controls, piloting you to your destination with ease and
precision. So bait the lines or simply enjoy the sunset. With the SI-TEX SP-80
Autopilot you're right on course. Hands free, and ready to really let you go.
Designed for inboard outboard and sterndrive vessels with either hydraulic
or quadrant steering systems.
Automatically pilots to your next waypoint using built-in NMEA 0183
Loran/GPS interface.
Waterproof control head easily installs flush or surface mounted.
System can be expanded by adding fully functional second-station option with
the SI-TEX SP-70 Handheld Control Unit.
Bold, backlit display with ten levels of brightness for clear reading in any
light.
Accurate digital displays of rudder angle and operating mode in use,
constantly giving you up-to-the minute operating status.
Automatic Sea State and Trim controls and ten selectable levels of rudder
sensitivity with high and low speed settings for smooth, precise steering.
Rudder feedback verifies autopilot's commands.
Ghost Rudder backup allows autopilot to use memory of rudder movements to
calculate new movements in event of rudder feedback failure.
Heading Output feature allows you to stabilize radar display.
Built-in diagnostics and self tests, plus visual and audible alarms.
Power Steering mode offers convenient push-button steering. Stand-By mode
for manual steering situations.
Optional analog Rudder Angle Indicator for easy, at-a-glance reading of
exact rudder position.
Works with solenoid valves also.
SI-TEX SP-80 AUTOPILOT SYSTEM - Specifications
Operating Voltage
10 ~
40V DC
Power Consumption
Average 3 amps
Solenoid Output
20
amps max.
DC Reversing Pump
± 20
amps max.
Clutch Output
3
amps max.
Radio Navigational Interface
NMEA
0183
Heading Reference
Fluxgate
Course Resolution
l°
Course Detection
0.25°
Pumpset
18
cubic inch, 12V DC standard*
Dimensions
Control Unit: 6"W x 1"D x 3.1"H Processor Unit: 6.3"W x
15"L x 2.7"H Fluxgate Compass:5.6"W x 4.2"L x
3.4"H Pump: 4.8"W x 7.5"L x 4"H
*Optional Pumpsets Available
30
cubic inch, 12V DC or 32V DC for vessels up to 60' 75 cubic inch, 32V DC for
vessels over 60' Call Customer Service for
Details.
Options
Rudder Angle Indicator Kit for Second Station installation SP-70
Autopilot fixed portable control unit
Si-Tex SP-80 Autopilot System Model : SP-80L (With Linear Feedback for Outboards)
For boater who know where they're going. SP-80 takes you where you want to
be--effortlessly. It's smart, precise piloting gives you the extra hand on deck
you've always needed. And the operation is a snap: Simply set the course and the
SP-80 takes the controls, piloting you to your destination with ease and
precision. So bait the lines or simply enjoy the sunset. With the SI-TEX SP-80
Autopilot you're right on course. Hands free, and ready to really let you go.
Designed for inboard outboard and sterndrive vessels with either hydraulic
or quadrant steering systems.
Automatically pilots to your next waypoint using built-in NMEA 0183
Loran/GPS interface.
Waterproof control head easily installs flush or surface mounted.
System can be expanded by adding fully functional second-station option with
the SI-TEX SP-70 Handheld Control Unit.
Bold, backlit display with ten levels of brightness for clear reading in any
light.
Accurate digital displays of rudder angle and operating mode in use,
constantly giving you up-to-the minute operating status.
Automatic Sea State and Trim controls and ten selectable levels of rudder
sensitivity with high and low speed settings for smooth, precise steering.
Rudder feedback verifies autopilot's commands.
Ghost Rudder backup allows autopilot to use memory of rudder movements to
calculate new movements in event of rudder feedback failure.
Heading Output feature allows you to stabilize radar display.
Built-in diagnostics and self tests, plus visual and audible alarms.
Power Steering mode offers convenient push-button steering. Stand-By mode
for manual steering situations.
Optional analog Rudder Angle Indicator for easy, at-a-glance reading of
exact rudder position.
Works with solenoid valves also.
SI-TEX SP-80 AUTOPILOT SYSTEM - Specifications
Operating Voltage
10 ~
40V DC
Power Consumption
Average 3 amps
Solenoid Output
20
amps max.
DC Reversing Pump
± 20
amps max.
Clutch Output
3
amps max.
Radio Navigational Interface
NMEA
0183
Heading Reference
Fluxgate
Course Resolution
l°
Course Detection
0.25°
Pumpset
18
cubic inch, 12V DC standard*
Dimensions
Control Unit: 6"W x 1"D x 3.1"H Processor Unit: 6.3"W x
15"L x 2.7"H Fluxgate Compass:5.6"W x 4.2"L x
3.4"H Pump: 4.8"W x 7.5"L x 4"H
*Optional Pumpsets Available
30
cubic inch, 12V DC or 32V DC for vessels up to 60' 75 cubic inch, 32V DC for
vessels over 60' Call Customer Service for
Details.
Options
Rudder Angle Indicator Kit for Second Station installation SP-70
Autopilot fixed portable control unit
